The Dillon AP Mechanical Dynamometer exhibits limitless versatility as a tension, traction and weight measuring instrument.
Full selection of capacities--
Available in capacities from 500 to 100,000 pounds, 200 to 50,000 kilograms, 2,000 to 500,000 Newtons.
The core of the device is a steel flexing beam. The enclosure is a heavy aluminum alloy case with baked on protective finish. The dial face is sealed and cushioned with a rubber gasket.
Safe for overhead applications--
Most models have a 5:1 ultimate safety factor.
Use it like a tare. It can cancel preset load values up to 20% of device capacity.
NIST Traceable - The EDxtreme comes with a NIST traceable calibration certificate.
- Accuracy: 0.5% of full scale capactiy for precise data.
- Broadest range of capactities and resolutions are certain to fit your needs
- Wide temperature range for use in nearly any environment (-50 to 140F / -45 to 60C)
- Largest safety factor for overload protection and long life
- No batteries required
- Dial size choice for best in portability or visibility
- Anti-parallax dial and pointer produce accurate readings from any perspective
- Maximum hand retains peak load point and is easily reset
- High strength case resists heavy blows
- Generous shackle openings mate with most hooks an dhardware
- High specification materials on all load components. Heat treated to tight tolerances
- Offset load beam eases tension measurement
- NIST Traceable Certificate Included
|AP5-500LB||500 lbs||5||5" (125 mm)|
|AP5-1000LB||1,000 lbs||10||5" (125 mm)|
|AP5-2000LB||2,000 lbs||20||5" (125 mm)|
|AP5-4000LB||4,000 lbs||25||5" (125 mm)|
|AP5-5000LB||5,000 lbs||50||5" (125 mm)|
|AP5-6000LB||6,000 lbs||50||5" (125 mm)|
|AP5-8000LB||8,000 lbs||50||5" (125 mm)|
|AP5-10000LB||10,000 lbs||100||5" (125 mm)|
|AP5-15000LB||15,000 lbs||100||5" (125 mm)|
|AP5-20000LB||20,000 lbs||200||5" (125 mm)|
|AP10-500LB||500 lbs||2||10" (250 mm)|
|AP10-1000LB||1,000 lbs||5||10" (250 mm)|
|AP10-2000LB||2,000 lbs||10||10" (250 mm)|
|AP10-4000LB||4,000 lbs||20||10" (250 mm)|
|AP10-5000LB||5,000 lbs||20||10" (250 mm)|
|AP10-6000LB||6,000 lbs||25||10" (250 mm)|
|AP10-8000LB||8,000 lbs||50||10" (250 mm)|
|AP10-10000LB||10,000 lbs||50||10" (250 mm)|
|AP10-15000LB||15,000 lbs||100||10" (250 mm)|
|AP10-20000LB||20,000 lbs||100||10" (250 mm)|
|AP10-30000LB||30,000 lbs||200||10" (250 mm)|
|AP10-40000LB||40,000 lbs||200||10" (250 mm)|
|AP10-50000LB||50,000 lbs||200||10" (250 mm)|
|AP5-200KG||200 kg||2||125 mm (5")|
|AP5-500KG||500 kg||5||125 mm (5")|
|AP5-1000KG||1,000 kg||10||125 mm (5")|
|AP5-2000KG||2,000 kg||20||125 mm (5")|
|AP5-4000KG||4,000 kg||25||125 mm (5")|
|AP5-5000KG||5,000 kg||50||125 mm (5")|
|AP5-10000KG||10,000 kg||100||125 mm (5")|
|AP10-200KG||200 kg||1||250 mm (10")|
|AP10-500KG||500 kg||2||250 mm (10")|
|AP10-1000KG||1,000 kg||5||250 mm (10")|
|AP10-2000KG||2,000 kg||10||250 mm (10")|
|AP10-4000KG||4,000 kg||20||250 mm (10")|
|AP10-5000KG||5,000 kg||50||250 mm (10")|
|AP10-10000KG||10,000 kg||50||250 mm (10")|
|AP10-15000KG||15,000 kg||100||250 mm (10")|
|AP10-20000KG||20,000 kg||100||250 mm (10")|
Klaxon signal alarm
Mounted on rear of the Dynamometer and sounds an alarm at a preset load point. For capacities through 20,000 pound (10,000 kg) only
The standard zero position is 9 o'clock for both the 5" and 10" dial sizes. Capacities up to 20,000 lb can be supplied with the zero at 12, 3 or 6. Photo shows a nonstandard position of 12 o'clock.
Oversized shackle and pin assembly. Available with all AP5 models and up to AP10-20000LB/AP10-10000KG models only.
Addition to standard shackle & pin (sold as an accessory at time of order or after sale)
Steel storage case For 10" (250 mm) diameter model AP10-20000LB/AP10-10000KG and lower
|Part #||Hook Rating||For Dynamometer Ratings|
|AP-H3||3-ton||500-6,000 lb / 200-2,000 kg|
|AP-H5||5-ton||8,000-10,000 lb / 4,000-5,000 kg|
|AP-H10||10-ton||15,000-20,000 lb / 10,000 kg|
5" (125 mm) diameter AP dynamometer includes a rugged ABS plastic carry case with die-cut foam inserts. Capacities of 30,000 lb (15,000 kg) and above are shipped in a heavy-duty reinforced plywood crate. An optional steel carry case is available for 10" (250 mm) diameter dynamometers up to 20,000 lb (10,000 kg) capacity.